lab02 : Selection Sort

num ready? description assigned due
lab02 true Selection Sort Wed 04/18 08:00AM Sun 04/22 11:59PM

Goals

By the time you have finished this lab, you should have demonstrated your ability to code a selection sort on a an array of pointers to objects in C++. You will also get more practice with doing test-driven development of object-oriented C++ code, this time with two classes that interact with one another.

Step by Step

Step 0: Getting Started

This lab may be done solo, or in pairs.

Before you begin working on the lab, please decide if you will work solo or with a partner.

As stated in Lab00, there are a few requirements you must follow if you decide to work with a partner. I will re-iterate them here:

Once you and your partner are in agreement, choose an initial driver and navigator, and have the driver log into their account.

Step 1: Copying some programs from my directory

Visit the following web link—you may want to use “right click” (or “control-click” on Mac) to bring up a window where you can open this in a new window or tab:

http://cs.ucsb.edu/~richert/cs32/misc/lab02/

You should see a listing of several C++ programs. We are going to copy those into your~/cs32/lab02 directory all at once with the following command:

cp ~richert/public_html/cs32/misc/lab02/* ~/cs32/lab02

Note: If you get the error message:

cp: target ‘/cs/student/youruserid/cs32/lab02’ is not a directory

then it probably means you didn’t create a ~/cs32/lab02 directory yet. So do that first.

The * symbol in this command is a “wildcard”—it means that we want all of the files from the source directory copy be copied into the destination directory namely ~/cs32/lab02.

After doing this command, if you cd into ~/cs32/lab02 and use the ls command, you should see several files in your ~/cs32/lab02 directory—the same ones that you see if you visit the link http://cs.ucsb.edu/~richert/cs32/misc/lab02/

If so, you are ready to move on to the next step.

If you don’t see those files, go back through the instructions and make sure you didn’t miss a step. If you still have trouble, ask your TA for assistance.

Step 2: Understanding the Starting Point Code

Step 2a: Understanding the tddFuncs.cpp code

You may find it interesting to compare the versions of tddFuncs.h and tddFuncs.cpp from with the ones from this lab (lab02).

You do NOT need to make any changes to these files. However, they serve the purpose of showing how we can use Template Functions in C++ and Template Specialization to create code that is more “DRY”, i.e. follows the adage “Don’t Repeat Yourself”.

Here are links to the versions of these files from last week and this week:

lab01 lab02
tddFuncs.h tddFuncs.h
tddFuncs.cpp tddFuncs.cpp

Some things to notice:

Again, you don’t need to do anything with this for this lab, so if you want to gloss over this for now and come back to it later, that’s fine. You need to look it over though, and understand what is going on.

A final note: the way we overloaded the functions here does work, and it has the advantage of being easy to understand and follow. However, it is probably NOT the “current best practice” way of handing this, and strictly speaking, is not “template specialization”, it is rather just “garden variety overloading”. We’ll go over the “better way”, i.e. true template specialization, in a future lab or lecture. For now, if you are curious, and want to “read ahead”, consider the following StackOverflow link:

http://stackoverflow.com/questions/17344405/template-function-specialization-vs-overloading

(H/T to Hunter Laux for finding this.)

Step 2b: Understanding the CXXFLAGS in the Makefile

In this week’s Makefile, as with last weeks, we have the following.

CXXFLAGS = -Wall -Wextra -Wno-unused-parameter -Wno-unused-private-field

# Change to this before final submission:
# CXXFLAGS = -Wall -Wextra -Werror

See the explanation in lab01 of these two definitons for CXXFLAGS. It will be important for you to modify these before submitting to make sure that your code will compile with those flags set.

Step 2c: Understanding the Student and Roster classes

The Student.h and Student.cpp classes are mostly unchanged from lab01, except for the addition of a few new methods.

Please look those over—these are mostly methods for reading in a Student from a comma-separated string, and are there so that we can read in students from a CSV file (i.e. a file of comma separated values) into a Roster.

The Roster.h and Roster.cpp files, though, are new.

You’ll see that the Roster.h file contains the specification of a class that represents a collection of Students. It represents this collection with a simple fixed size C++ array of pointers to Student objects. THERE ARE CERTAINLY BETTER WAYS TO IMPLEMENT A COLLECTION OF STUDENTS. The point here, though, is to understand sorting algorithms.

We will implement a selection sort on the array of pointers to Student objects. Since we only have to swap the pointers in the array—we don’t have to swap the entire Student object—our algorithm will run in the same amount of time no matter how large the actual Student objects may be. In general, this is a good idea if/when one is working with large objects.

The files where you will be making changes this week are:

Step 2c: Understanding the tests: testStudent.cpp and tddFuncs.cpp

What you should do next is to look through the test cases in testStudent.cpp (which includes all the tests from the three test files in lab01) and testRoster1.cpp, testRoster2.cpp and testRoster3.cpp

Look over these files and understand how they work. Then, type make tests to compile and run all of the tests.

You can also type, for example, make testRoster1 and ./testRoster1 to make and run these tests one at a time.

Step 3: Make all the test cases pass

When you are ready, start editing Student.cpp, replacing the stubs for the constructor first, and then each of the stubs for the other functions. Get all the tests in testStudent to pass first.

Then, read through testRoster1.cpp and see what methods in Roster.cpp you think you need to update in order to get those tests to pass.

Then proceed to do the same with testRoster2.cpp and testRoster3.cpp.

Step 4: Checking your work before submitting

When you are finished, you should be able to type make clean and then make tests and see that all the test cases pass.

At that point, you are ready to try submitting to the Gradescope system.

Step 5: Submitting via Gradescope

The lab assignment “Lab02” should appear in your Gradescope dashboard in CMPSC 32. If you haven’t submitted anything for this assignment yet, Gradescope will prompt you to upload your files.

For this lab, you will need to upload your modified files (i.e. Student.cpp and Roster.cpp). You either can navigate to your file, “drag-and-drop” them into the “Submit Programming Assignment” window, or even use a GitHub repo to submit your work.

If you already submitted something on Gradescope, it will take you to their “Autograder Results” page. There is a “Resubmit” button on the bottom right that will allow you to update the files for your submission.

For this lab, if everything is correct, you’ll see a successful submission passing all of the autograder tests.

Remember to add your partner to Groups Members for this submission on Gradescope if applicable. At this point, if you worked in a pair, it is a good idea for both partners to log into Gradescope and check if you can see the uploaded files for Lab02.